Home > Windows 7 > Windows 7 Cannot Connect To Nt Server

Windows 7 Cannot Connect To Nt Server

could u elaborate more about the problem? asked 5 years ago viewed 1334 times active 3 years ago Related 0Require Acceptance of Terms to Use Windows Machine0How to get a windows domain server to recognize a linux machine log off - if you have only made a temporary connection (if you used Start->Run, IE or mapped a drive without choosing reconnect at logon) 2. LikeLike phil says: May 23, 2010 at 19:13 ftp: connection failed (total commander) -> tried with ip or hostname, dns is routed correctly, i see the ip adress in the connection http://macinstruct.net/windows-7/windows-7-cannot-connect-to-a-nt-server.html

I tried to map a network drive on w8 from w7 (using both ip address and name), choosing "connect using different credentials" as per a response on technet still yielded Error I tried turning on password protected sharing under all networks (as that is what I am trying to do, with advanced sharing?) but it did not make a difference. –Jimmy Aug Sometimes Network Discovery under windows simply won't work, but the network is present, just inaccessible. As long as both have an IPv4 address, they'll communicate over IPv4. –LPChip Aug 4 '14 at 23:08 @LPChip and yet they don't! :( –Jimmy Aug 4 '14 at

LikeLike Reply ykyuen says: May 27, 2011 at 10:58 ya… never ending windows update… =P LikeLike Reply Frank says: June 13, 2011 at 10:49 two of my Win7 machines (one is About Advertising Privacy Terms Help Sitemap × Join millions of IT pros like you Log in to Spiceworks Reset community password Agree to Terms of Service Connect with Or Sign up New laptop (Toshiba - again, same operating system) will not connect. Now it should be fixed.

The exact message is as follows; Error 20/05/2009 09:49:13 NETLOGON This computer could not authenticate with [DomainController], a Windows domain controller for domain [Domain], and therefore this computer might deny logon in that case, you could try to share any folder and see if your win7 could connect to that network folder. Click Start , type regedit in the Start Search box, and then press ENTER. 2. The windows 7 machine is called Richard and the log on message is saying log in incorrect on Richard/Clare please give password.

PCS-NickJul 11, 2012, 10:55 PM Connectivity worked from W2003 server but not from Win7The fix for Win7 connectivity is:Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settingsEnable file sharing for The blocking issue appears that w7 (and other machines) just can't see (including ping) w8. –Jimmy Aug 4 '14 at 23:05 Try turning password protected sharing off and sharing Thankfully I finally found this forum discussing NAS issues, and checked the Window's Features (Control Panel -> Programs and Features -> Turn Windows Features On/Off). If I enter \\[w8's ip address] either in windows explorer or in the start menu I get the same results as above.

Start a coup online without the government intervening Why is the 'You talking to me' speech from the movie 'Taxi Driver' so famous? you should be able to ping the server ip before u can connector to its network drive. Check the Sharing tab in the Properties window of a folder you're sharing and click the Share button. LikeLike Reply ykyuen says: June 20, 2011 at 09:19 Thanks~ =D LikeLike Reply cristy says: July 7, 2011 at 01:43 Okay, literally, I love you right now!

THANK YOU! Search Primary Menu Skip to content AboutPortfolioFaz JewelryLinux CommandsReadsSyntax Highlight旅行記 Search for: Windows Windows 7 - Cannot connect to network drive September 4, 2009 ykyuen 262 Comments Back from Spain! hope this help. The only two (ugly) workarounds are: 1.

Now on the same left side below the folder you clicked on find "CurretControlSet" and double click on it. 8. weblink After much gyration today, at this point it's looking pretty grim. I have deleted the trust at the server and rejoined same error. . XP and Win2K use DNS instead of NetBIOS to name domains.

It said the password is not valid! See more detailed instructions & screenshots. LikeLike Reply ykyuen says: April 16, 2010 at 13:20 I think u have to make sure the machines can ping each other. navigate here Some old software that just has to have it and no one wants to pay for the upgrade?

After resetting (see below) and rebooting, I reset my credential manager and all network connections began persisting normally with no further issues (as an "enterprise" connection). The problem is my windows 7 HOME cannot detect the device. It is not possible, it is not supported.

When you find a policy item that contains the Power Users group, click to clear the Power Users check box and then click OK. 5.

have u ever tried to do a windows update and is your network drive hosted in a win2000 server? What is the Win7 network defined as (i.e. Would you please try newly released  build 7600 for all of the people that have the same problem. http://technet.microsoft.com/en-us/evalcenter/cc442495.aspxI have tried. We were on the phone with support for HOURS!

The others machines in the network can ping each other, the only one that can not ping the others is the Win7 machine, but I can use internet over the network please verify client is configured to reach a DNS server that can resolve DNS name in the target domain LikeLike ykyuen says: November 25, 2011 at 00:29 Maybe the following post Sorry for the delay.. his comment is here share|improve this answer edited Aug 28 '15 at 11:24 bertieb 2,55851226 answered Aug 28 '15 at 9:15 JustWilliam 112 add a comment| up vote 0 down vote I had something similar,

Method 1: Start -> Run 1. LikeLike Reply ykyuen says: October 13, 2010 at 23:17 you are welcome. =) LikeLike Reply artur says: November 19, 2010 at 02:14 I have a windows 2000 server and several windows W7 Pro is a 32-bit AND 64-bit operating system. Thank you so much!!!

But if I say ok and reboot the server, it seems like everythink works as i should..Way do I get this error??/Mads Wednesday, September 02, 2009 5:16 PM Reply | Quote Then click the Apply button. is there any other machine in the LAN which can connected to that network drive? Some of the lower versions of Windows 7 may not include it.If you can, use "File -> Add/Remove Snap-in" to add the Group Policy Object editor" - that should let you

Why can't I have spaces in my Windows 2000 NetBIOS domain name? Oct 24, 2001 John Savill | Windows IT Pro EMAIL Tweet Comments 6 Advertisement A. I plug in my wireless usb 2.