Home > Windows 98 > Windows 98 Cannot Print

Windows 98 Cannot Print

Discussions cover Windows 2003 Server, Windows installation, adding and removing programs, driver problems, crashes, upgrading, and other OS-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion Win98 Network - Cannot print document by Printing from DOS applications on Windows NT hosts This capability is not supported by pcAnywhere, but the technique is documented in How to print from a DOS-based program on a Windows Submit a False Positive Report a suspected erroneous detection (false positive). The Printers window appears.

For faster RTA speed: a. After 5 to 10 seconds, turn the printer back on. On the Driver tab, click Update Driver. If you have not yet bought your print server, I strongly recommend that you use only HP print servers in any network that uses WPDOS.

The 98 machines were not really slow.... d. Can't find your answer ?

For example, an Encapsulated PostScript (EPS) graphic object is intended for use on PostScript printers only. This file is available for download from the following Microsoft FTP site: ftp://ftp.microsoft.com/Services/whql/drivers/win95/printr/ To install the alternate Lpt.vxd file, follow these steps: Using Windows Explorer, rename the Lpt.vxd file in the The instructions that follow are based on the current software used with HP JetDirect print servers and assume that you are using a TCP/IP network; similar methods should work with other Because printing to LPT1.DOS uses low-level DOS commands to send a job to the printer, not all of the available wiring (or lines) in the port and printer cable are used.

Also, for use with WPDOS, each part of the printer's share name must have no morethan eight characters. Click Start, point to Programs, then click MS-DOS Prompt. Try the Alternate Lpt.vxd File (Windows 95 only) There is an alternate Lpt.vxd file that resolves the following problems: You cannot print or you receive timeout error messages on recent Compaq Don't have a SymAccount?

If you have not yet bought a new printer, try to buy one that works with a parallel cable so that you can print more easily from WPDOS. Note: To allow for printing from DOS, the printer name is restricted to 8 or fewer characters with no spaces. Click Start, point to Programs, point to Accessories, point to System Tools, then click ScanDisk. To use the Print Troubleshooter tool, follow these steps: Windows 95: Click Start, and then click Help.

These I/O addresses must match the I/O addresses in Device Manager. Try these steps to lower the printer's resolution: Click Start, point to Settings, and then click Printers. Printing Problems Occur Only in One Application If you can print from Notepad, WordPad, and other applications, try the following steps: What exactly is the printing problem? If you still cannot print to the network printer, perform standard network troubleshooting steps, such as: - Try to browse the print server. - Remove and reinstall your network protocols.

Right-click the printer you want to use, then click Properties. This is defined as the length of time from when you click print to when the print job is complete. That means that you must install the Windows printer driver for your printer and print a test page to make sure that the printer works correctly with Windows. check that spool settings are "start printing after the last page is spooled" and increase the timeout settings. 0 LVL 2 Overall: Level 2 Message Accepted Solution by:christatedavies2003-09-22 christatedavies earned

Change the Spool data format to RAW (if it is currently set to be anything else), and click OK. Click OK. warnings.) Print to USB or networked printers WPDOS, like all other DOS applications, cannot print directly to a printer that is connected to your computer by a USB port or network At the prompt, enter a command that looks like this (replace 192.168.11.97 with the IP address that you wrote down earlier, and replace HPDJ with the sharename of your printer!!): net

wyliecoyoteuk, that is the format for the port we are using... Simplify the Document: If you cannot print a complex document, try removing some of the graphic elements in the document, or convert all the fonts in the document to a printer-resident To examine or change these settings Click Start, point to Settings, and then click Printers.

Hard Disk Maintenance There should be at least 3 megabytes (MB) of free space on the hard disk that contains your temporary folder.

Spool files typically have a .SPL extension. If you are on a Novell network, your printer ports may be captured to a network printer. Perform a self-test on the printer. how do I use my print screen button on a windows 7 sony laptop?

If you cannot print to LPT1.DOS in normal mode, try restarting your computer in Safe mode, and then printing to LPT1.DOS. Get the answer johnnyb105Jun 19, 2013, 7:49 AM wow maybe I drank too much win 98 se wow johnnyb105Sep 19, 2013, 3:15 AM Cut and paste it left click highlight it The Add Printer Wizard will open. At the same time, pcAnywhere monitors the LPT and PRN printer ports.

Click Start, point to Settings, then click Printers. Remove and Reinstall the Printer Port If a conflict exists or the port's settings are incorrect, use Device Manager to remove the printer port. Right-click the printer you want to remove, then click Delete. Right-click the printer you want to use, and then click Properties.

c. Write down the IP address for future reference; it will look something like 100.200.10.23, but with entirely different numbers from the ones used in the example!!! Important: These methods work only if you already have a WPDOS printer driver for your printer and you have already installed the Windows printer driver for your USB or wireless printer